GUILLOTINE SPECIFICATION
2 x 61" &
3 x 45" VIDEO PROGRAMMATICS.
Schneider
Senator 155s & 115s with fully automatic
loading, extended airbed side tables and stacklifts. 1 Schneider
Senator Off-line jogger & restacker. Maximum sheet 1000x1400mm.For
standard guillotine work or trimming folded web sections to remove
excess waste or trims or separating to single copies.
FOLDING
SPECIFICATION
MBO machinery.
Maximum sheet 810x1600mm. Minimum fold 50mm. Maximum of 14 parallel
concertina folds, 7 parallel roll folds. In half then 6 concertinas
& in half again etc. Open / closed gatefolds as first folds
or on 2nd unit after first fold(s). Multi concertina on second unit
after first fold(s). 3 & 4 directional folding. Map or miniature
folds. Multi up working. Scoring & perforation. Burst binding.
Stepped or different width leaves. batch counting on all machines.
Inline ram bundling, shrink-wrapping or cellobanding.
SPINE
GLUING.SPECIFICATION
Maximum 16pp
self cover 297x210mm. (Product is achieved by roll folding head
& tail while applying adhesive to one long continuous spine,
press sheet size limitations are more likely to cause any problems).
GATHER,
STITCH & TRIM SPECIFICATION
Muller Martini
equipment. Prima & 321 lines. Each with 4 feeders plus cover
feeder. 1up or 2up working, trimming inline, 3/4/5/up for voucher/coupon
book work if guillotined to final size. Maximum trimmed size: 470x300mm.
Minimum trimmed size: 95x75mm. 2up A4 landscape working. 4 Loop
wire stitch facility (maximum bulk 3mm). Endorse folding parallel
to or across the spine, more than one endorsement fold possible.
Voucher books, pocket covers, batch counting, stocks & odd bundling.
Down to 50x50mm if guillotined after saddle stitch & to correct
imposition, i.e 3 or 4up working, 75x210mm 4up A4.
RAM
BUNDLE SPECIFICATION
Four machines.
Maximum dimension (one) 350mm. Maximum log length 15" / 380mm.
Single or cross straps. Using 4mm hardboard ends, not greyboard.
Equipment is available for shrink-wrapping logs.
SHRINK-WRAPPING
SPECIFICATION
Automatic,
for inline with machinery or hand fed, x6 machines for larger, more
unusual shapes or sizes. Maximum wrap size 450x800mm subject to
product thickness. PVC or polythene films.
STRAPPING
SPECIFICATION
Machinery
for periodical work involving stock & odd bundling operations.
Securing of parcels etc. for distribution.
RAM
PUNCHING SPECIFICATION
For playing
card type products, shaped pads / leaflets or booklets. Maximum
product size 160x160mm, minimum of 1.5mm trim required on all cut
sides.
COMB
BINDING SPECIFICATION
Maximum binding
length 400mm. Maximum bulk using round combs 28mm or using oval
combs 51mm. Black, white or coloured combs.
DRILLING
SPECIFICATION
Multi head
& single head machines. Single or multi hole work, including
six hole FILOFAX work. 4/12mm diameter hole range.
PADDING
SPECIFICATION
Any shape
or style. NCR fanapart sets, multi set NCR pads, cube pads, desk
pads, jotters or any other permutation. Normal paper as fanapart
sets, one time carbon sets. Folding of NCR sets, parallel to tipped
dimension.
COLLATION
SPECIFICATION
27 station
suction collator. Maximum sheet: 450x640mm.
20 station Setmaster suction collator. Maximum sheet: 297x210mm.
10 station Setmaster suction collator. Maximum sheet: 297x420mm.
6.000 square feet of factory space, 35 full time skilled staff for
all hand collation, assembly and kitting operations. Powered conveyor
lines for assembly and fulfilment.
VACUUAMATIC COUNTING
SPECIFICATION
Mark VI mobile
machine. Offered up to pallet of work and counting head runs up
corner and inserts tabs. Count ranges from 10 sheets upward, material
range 60gm2 - 150gm2.
CELLOBANDING
SPECIFICATION
Automatically applies and
heat seals plastic or plastic coated paper band to bundle. Maximum
band width 50mm / 2".
|